Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.

OpenWRT - Set up VLAN

  1. Navigate to Network then Switch

  2. Enable VLAN functionality

  3. Set up Tag (usually with IP Range i.E 192.168.110.0/24 will have the Tag 110)

  4. Make sure to map 1 Physical port to the VLAN and the CPU with the tagged button, the rest should be set on off

  5. Navigate to Network then to Firewall

  6. Click the Add button to create a new Firewall Zone

Note: Make sure to ALLOW the LAN Network to access the other networks (One way only)

PreviousOpenWRT - Set up new Wifi InterfaceNextOpenWRT - VPN Policy Routing

Last updated